TROUVE TES PROCHAINES MISSIONS FREELANCE ET PROPULSE TA CARRIÈRE !

The service holder is responsible for coordinating and supervising the activities that could be necessary during the Life of Project and FEED activities up to the close out. ACTIVITIES * Is accountable for all matters related to the PVV (Piping, Valves and Vessel) engineering, fit for purpose and with full respect to the Statement Of Requirement with approved changes. * Represents the COMPANY technical authority for PVV disciplines. * Prepares and suggests technical content of essential studies to initiate CONTRACTOR action and conformity with state of the art. * Supervises all subcontracted studies and provides support to other packages with the support of Head Quarters specialist. * Ensure Piping and valves design choices considering constructability, operability, and flexibility of the facilities. * Ensure Vessel design choices considering constructability, operability, and flexibility of the facilities. Vessel includes Static and Thermal Equipment (heat exchangers). * Proposes recommendations on technical deviation requests and keeps updated the documentation related to the PVV discipline. * Participates to studies required by third parties as required. * Communicates and applies the H3SE policies of the COMPANY and ensure the engineering is developed accordingly. * Ensures the correct implementation of COMPANY rules and specifications (CR's/ GS's), Project specifications, relevant international standards, and any applicable regulations requirements. * Get assistance from company's specialists, or third parties, if required, for specific topics * Coordinate with our affiliate in Nigeria as necessary * Leads the review of the CONTRACTOR' key deliverables. * Provides technical assistance to the project for any technical audits (required by the banks and the insurance companies or Board of Directors, HAZOP, PR...). * Participate, in coordination, with others to the Inspection and Tests Plans (ITP) and FAT preparation and execution. To attend meetings / FATs with VENDORS where necessary. * Manages the Static and Thermal Equipment development of engineering specifications and provide quality assurance in the procurement of materials, equipment and services to ensure conformity with sound engineering practice and cost effectiveness. * Provide support and search for VENDORS assistance if needed. * Ensure the quality and completeness of PVV designs/packages Final Documentation (deliverables both from the CONTRACTOR and the VENDORS) in compliance with the Project Scope of Work, Specifications and Procedures and allowing an adequate hand-over to the operation. * Ensures that all PVV equipment are commissioned and started up as per detailed engineering documentation and accordingly to Vendor recommendations. Provide support and search for Vendor assistance if needed. * Reports potential impact on overall project strategy, planning and target achievement. * Promotes workshops with the HQ specialist and or CONTRACTOR's specialist to ensure COMPANY concepts and comments are well understood and quickly integrated in technical documents. * Guides CONTRACTOR main design selection in a Fit-for-Purpose approach to reach an optimized design. Accordingly, he promotes and follow until approval the deviation request to COMPANY requirements in the main time. * Ensures through efficient review the good respect of the applicable frame of reference. * Participates actively to proper interface management with Process, Safety, Rotating, Electrical... studies. * Reviews and comments the key technical documents of the interfacing disciplines. * Participates to the Project HAZID, HAZOP, SIL, PR. * Organizes with its counterpart discipline weekly meetings and report highlights to its management with proposed mitigation measures when deemed required. * Participates to internal engineering weekly meetings. Reporting areas of concern to Engineering Manager. * Provides its technical inputs to any contractual discussions with CONTRACTOR. * Contributes to the development of the digital plant though the centric data management when applicable. * Call for/Participate to interfaces coordination activities and ensure synergies are developed between the different CONTRACTORS. * Participate to VENDORS evaluation and for LLIs technical evaluation. * Get knowledge of the Nigerian norms and practices and use it in project when relevant. * Assist commissioning, start up and Operation team when required. Transfer project knowledge to operations. * Prepare REX and Lessons Learnt all along the FEED. * Contribute to personnel skills improvement and encourage knowledge transfer. CONTEXT AND ENVIRONMENT The GPI team oversees Ntokon and Ima projects, main drivers being to ensure a cohesive approach across both projects, to mutualize best practices, create synergies towards CAPEX reduction objectives. Both projects are innovation driven with Conductor Supported Platform and Zapock pipeline concepts to be rolled-out and are developed with the objectives to maximize economical results by optimizing the reserves, the schedule, reducing the costs and the Greenhouse Gas (GHG) emission, while maintaining the technical quality of the installations, with high H3SE requirements and focus. Ntokon project * is a development in OML102 block in Nigeria based on minimalistic wellhead platform tied-back to Ofon OFP2 CPP via 26km pipelines (1 multiphasic production line, 1 water injection line). * FEED started in October 2024 for 5 months, FID is expected end Q2 2025 and first oil Q2 2027. Ima Project * is a development in OML112/117 block in Nigeria based on minimalistic wellhead platform tied-back to BNAG CPF via 23km pipelines (15km offshore, 8km onshore). * FEED starts in Q1 2025, FID is expected end Q4 2025 and first oil Q1 2028.

The service holder is responsible for coordinating and supervising the activities that could be necessary during the Life of Project and FEED activities up to the close out. ACTIVITIES * Accountable for all matters related to the safety engineering, fit for purpose and with full respect to the Statement of Requirement with approved changes. * Represents the COMPANY technical authority for this discipline. * Prepares and suggests technical content of essential studies to initiate CONTRACTOR action and conformity with state of the art plant design. * Defines the overall safety concepts and engineering principle to meet the COMPANY requirements, applicable regulations, and good engineering practices in terms of design, maintainability, operability, and security. * Supervises all subcontracted studies and provides support to other packages with the support of Head Quarters specialist. * Proposes recommendations on technical deviation requests and keeps updated the documentation related to the Safety discipline. * Participates to studies required by third parties. * Get assistance from the specialists, or third parties, if required, for specific topics * Coordinate with our affilate in Nigeria as necessary * The job holder will be supported by one Safety Engineer. He is responsible for the Safety Engineer workload, task attribution and priority. * Communicates and applies the H3SE policies of the COMPANY and ensure the engineering is developed accordingly. * Ensures the correct implementation of COMPANY rules and specifications (CR's/ GS's), Project specifications, relevant international standards and any applicable regulations requirements. * Update as required the project Safety Concept document for EPC phase. * Leads the review of the CONTRACTOR' key deliverables such as: Safety Concept, Safety Philosophies, Safety distances calculations notes and QRA/FRA/ERA and consolidate comments from the other engineering disciplines and operations. * Provides technical assistance to the project for any technical audits (required by the banks and the insurance companies or Board of Directors, HAZOP, PR...). * Reports potential impact on overall project strategy, planning and target achievement. * Promotes workshops with the HQ specialist and or CONTRACTOR's specialist to ensure COMPANY concepts and comments are well understood and quickly integrated in technical documents. * Guides CONTRACTOR main design selection in a Fit-for-Purpose approach to reach an optimized design. Accordingly, he promotes and follow until approval the deviation request to COMPANY requirements in the main time. * Ensures through efficient review the good respect of the applicable frame of reference. * Participates actively to proper interface management with Process, Piping, Electrical, Instrumentation... studies carried out during the EPC phase. * Reviews and comments the key technical documents of the interfacing disciplines such as Process, piping, instrumentation, rotating machines ... as well as project procedures, if required. * Participates to the Project HAZID, HAZOP, SIL, Risk reduction Workshop, TRA reviews, and PR. * Organizes with its counterpart discipline weekly meetings and report highlights to its management with proposed mitigation measures when deemed required. * Participates to internal engineering weekly meetings. * Provides its technical inputs to any contractual discussions with CONTRACTOR. * Contributes to the development of the digital plant though the centric data management when applicable. * Participates to audits of risk-CONTRACTORs if need be. * Participate to Vendors and for LLIs technical evaluation. * Ensure design validity and coherence with other disciplines. * Participates actively to proper interface management with all CONTRACTOR. * Call for/Participate to interfaces coordination activities and ensure synergies are developed between the different CONTRACTORs. * Get knowledge of the Nigerian norms and practices and use it in project when relevant. * Assist commissioning, start up and Operation team when required. Transfer project knowledge to operations. * Prepare REX and Lessons Learnt all along the FEED. * Contribute to personnel skills improvement and encourage knowledge transfer. * Participate to the critical safety equipment packages factory inspections as deemed necessary. * Contribute to personnel skills improvement and encourage knowledge transfer. * Contribute to the advancement of working methods and tools within his specialty. CONTEXT AND ENVIRONMENT The GPI team oversees Ntokon and Ima projects, main drivers being to ensure a cohesive approach across both projects, to mutualize best practices, create synergies towards CAPEX reduction objectives. Both projects are innovation driven with Conductor Supported Platform and Zapock pipeline concepts to be rolled-out and are developed with the objectives to maximize economical results by optimizing the reserves, the schedule, reducing the costs and the Greenhouse Gas (GHG) emission, while maintaining the technical quality of the installations, with high H3SE requirements and focus. Ntokon project * Is a development in OML102 block in Nigeria based on minimalistic wellhead platform tied-back to Ofon OFP2 CPP via 26km pipelines (1 multiphasic production line, 1 water injection line). * FEED started in October 2024 for 5 months, FID is expected end Q2 2025 and first oil Q2 2027. Ima Project * Is a development in OML112/117 block in Nigeria based on minimalistic wellhead platform tied-back to BNAG CPF via 23km pipelines (15km offshore, 8km onshore). * FEED starts in Q1 2025, FID is expected end Q4 2025 and first oil Q1 2028.

The service holder shall be involved in the ABSHERON FFD FEED and will be in charge of all the technical safety studies in particular process safety engineering and related operational requirements, including company and international standards (e.g., NFPA, API). The service holder will provide company-wide technical guidance and assistance during design-related to CPF facilities for adequacy of design, operations and maintenance. The service holder will initiate and participate in studies to resolve specific problems outside currently available technology. During FEED, the service holder will oversee the performance of the FEED CTR on time and on budget FEED deliverable submission for her or his scope of work and as well actively participate in the EPC CFT preparation. The service Holder could as well be involved during the current pre-feed extension. The service holder will perform this work in accordance with JOCAP and the Client OneTech and Project rules, guidelines and procedures. ACTIVITIES The service holder must possess strong experience in technical safety, and be able to identify, control and manage risks related to her or his scope of work and highlight any opportunities. This includes adhering to the Company Code of Conduct, Vision, Values and Behaviours, as supported by the Safe System of Working including Accountability of Safety. The Service holder shall: * Reviews Contractual documents (Contractual Scope of Work, Responsibility Matrix, BoD, Project Technical specifications, Company standards) related to his or her discipline. * Participates to inter-discipline check of documents for its field of activity. * Review the hazard identification and consequence evaluation exercises. * Review the safety studies (EER, dropped object, flare radiation...). * Participate and review the hazardous area classification drawings. * Review and comment the fire and gas matrix. * Review and analyze the fire and gas, safety appliance locations and escape routes drawings, the specification of fire protection and fire detection systems. * Attend to the preparation / coordination of the documentation package for safety reviews (HAZID, FIREPRAN, HAZOP, SIL...), and produces the safety review reports. * Review and guide the design of fire protection and fire detection systems, the design of EER system. * Assist to the hydraulic studies of fire water systems. * Review the data sheets and the requisitions and perform Bid evaluations for the fire protection equipment and the life-saving appliances, assists to the definition of the lay-out. * Assist to the performance of the risks analysis and/or reliability studies. Shall review the noise control activities. * Verifies the correct implementation of the HSE aspects in the design and vendors documentation through audits and reviews. * Shall be aware of the Client HSE Standards. * Update and maintain engineering documentation and drawings. * Knowledge of environmental principles, practices, procedures, laws, regulations, and current Country legislative issues.

* Will report to the project management. * Will be the leader of the discipline for the project. * Will be responsible of the global scope for safety discipline including management of the safety studies & the HAZID. * Will prepare all documentation related with the project scope (refer to typical deliverable list) * Must be autonomous. Will be in charge of: * Project planning and progress follow-up * Organization of the meetings with client and internal * Interactions with client and the project management * Coordination with other disciplines TYPICAL DELIVERABLE LIST * Safety Concept * Philosophies: + Active and Passive Fire Protection + Fire and gas detection + Escape * Specifications: + Passive Fire Protection + Fire & Gas Detectors + Safety Equipment (Firefighting & Lifesaving) + Flooding system * Calculation Notes: + Safety Distances + Flammable and Toxic Gas Dispersion + Fire Water Demand + Foam Demand + Fire & Explosion Risk Analysis * Layouts: + Hazardous Area layouts + Escape routes + Safety Equipment layouts + Fire Zone / F&G Detector arrangement layouts * Lists: + Safety Equipment List + Hazardous Area Classification Schedule + Effluent List (Environment) * Process: + UFD - Firewater System + P&IDs for Firewater Network + Fire & Gas Logic Diagrams * Scope of Work for Safety studies: + Fire & Explosion Risk Analysis (FERA) + Noise Study + RAM Study * Reviews (Preparation, Participation and Reports): + HAZID + HAZOP for Fire water pumps TECHNICAL REQUIREMENTS * Experience as a Senior/Lead in O&G Offshore FEED projects: 10 years minimum * Applicable regulations, codes of practice, international standards including 4th revision of EI15, NFPA 10 to 16, NFPA 2001, IEC 60079 * Familiar with 3D model viewer software Autodesk - Naviswork

The purpose of the service activities is to carry out all the technical flow assurance studies for block 58, as part of the installations necessary for the development of the first field of B58. Carrying out all the flow assurance studies for GPI Suriname Project. Preparing and monitoring of the HIPS file, when necessary. ACTIVITIES * Adopt and demonstrate exemplary behavior with regards to HSE, implement HSE rules and requirements within his area of responsibility. * Preparation of documents bringing together the design bases necessary for flow assurance studies, requiring consultation with other disciplines, and integration of the results of fluid analyzes for which data must be obtained. * Definition of the flow assurance studies to be carried out at each stage of the studies, together with the identification of assistance and subcontracting needs. The provider will be monitoring and completing all the required studies. * Management of the progress of flow assurance activities, advice and guidance of technical contractor and GPI teams involved in Flow-Assurance activities, proposal of necessary technical decisions on time. * Verification of the proper production of internal deliverables and contractor deliverables relating to the Flow-Assurance discipline (quality and deadlines). * Be the focal point for Flow Assurance for the various reviews and technical audits planned (i.e. preparation, monitoring, closure). * Selection and optimal sizing of networks and definition of their operability regarding hydraulic, thermal and fluid risks or design constraints linked to the different packages; investigation into possible design options and carrying out sensitivity studies to make the necessary technical decisions. * Definition and preparation of summary documents of the flow assurance data necessary for each package according to the study stages. * Ensure that all flow assurance and process studies are consistent with operating philosophy. Highlight any modification in the operating philosophy that is shown necessary by flow assurance and process studies. * Participate to HAZID/HAZOP, PID review, safety engineering review as required for Process/FA discipline. CONTEXT & ENVIRONMENT The activity takes place in the context of the execution phase of a major project in Suriname. The Suriname GPI is a multidisciplinary team that coordinates the studies managed by the Client OneTech on the Deep and Shallow Water discoveries of offshore Suriname Block 58. The technical challenges the GPI / Project will face are the reservoir development and management, FPSO, and subsea production/injection system. The Suriname Team will develop the Project with the objectives of maximizing economic results by optimizing the reserves, and the schedule, reducing the costs and the Greenhouse Gas (GHG) emission, while maintaining the technical quality of the installations, with high H3SE requirements and focusing.