Sps Umbilical Riser Package Project Control Lead Sps Umbilical Riser Package Project Control Lead - La Celle-sous-Gouzon - Plein temps (> 32 heures)

The Service holder will be acting through the C&P P2P process, which involves the management of the workflow for the Purchase Requests (PR's) and the creation and modification of the Purchase Orders (PO's). The process includes the management of various type of contracts, but mainly: Technical Assistance Services, Third Parties Services, and any PR-PO's linked with EPC's Contracts (ex: Variation Orders). Reporting to the Project Control Manager (PCM), the service provider will be liaising with the PCM Team, Package Managers and 3rd parties' contractors as needed, and managing any issues related to PR's-PO's activities for the B58 Suriname Project throughout the Project life cycle. ACTIVITIES The Service Supplier will participate actively in the PCM activities, covering all B58 Suriname packages (FPSO, SURF, SPS, Drilling). The Service holder will highlight all matters regarding PR's, POs to the Cost Control Lead, using SAP Unisol, supporting procurement processes and maintaining data accuracy across systems. The Service holder will apply the SURINAME Affiliates C&P procedures in all steps of the PR's-PO's process and will be a focal point with Affiliate when needed. Part of the Service will include, but not be limited to, preparing, analyzing, processing, and presenting all information and documentation related to PR's & POs. When required it will be participating in the Controls SOX activities linked with POs in close liaison with the Cost Control Lead. The service holder may participate to the training or assistance to the Project stakeholders within their routine actions linked with PR's & PO's (workflow monitoring, validation, rejection, etc...) The service holder shall highlight and escalate any issues presented regarding PR's &POs and propose any mitigation action whenever needed / identified. Attitude/Accountabilities: * Be accountable for * Demonstrating exemplary behavior with regards to HSSE and to respect all HSSE requirements. * Adopt and demonstrate exemplary behavior with regard to the Company Ethics and "Code of Conduct" policy. * Handling confidential documents and information with the utmost discretion. * Maintaining confidentiality during meetings, discussions, and correspondence with internal and external stakeholders * Inspiring trust, integrity, and professionalism * Maintaining professionalism, efficiency, and effectiveness in the role at all times. * Provide SAP Unisol Specialist Service with hands-on experience in the MM (Materials Management) module to cooperate with the SURINAME Project Team. * Utilize SAP Unisol with the MM module to create and manage Purchase Request (PR's) and Purchase Orders (POs). * Collaborate with the PCM teams to ensure timely and accurate PO processing. * Maintain and analyze procurement data using Excel spreadsheets, including advanced functions (e.g., pivot tables, VLOOKUP). * Support the project teams by ensuring material requirements are met for EPC projects. * Ensure compliance with the client and the Oil and Gas industry for procurement processes. * Troubleshoot and resolve issues within SAP Unisol related to procurement workflows. * Coordinate with Contractors/Affiliate and stakeholders to track and manage deliveries and resolve discrepancies. CONTEXT & ENVIRONNENT The activity takes place in the context of the execution phase of a major project in Suriname. The Suriname GPI is a multidisciplinary team that coordinates the studies managed by the client OneTech on the Deep and Shallow Water discoveries of offshore Suriname Block 58. The technical challenges the GPI / Project will face are the reservoir development and management, FPSO, and subsea production/injection system. The Suriname Team will develop the Project with the objectives of maximizing economic results by optimizing the reserves, and the schedule, reducing the costs and the Greenhouse Gas (GHG) emission, while maintaining the technical quality of the installations, with high H3SE requirements and focusing.

The Service Holder will be responsible for all the Steel Lazy Wave Riser design activities and technical matters related to the Venus project, as part of the GPI (''Groupe Projet Interne'') Venus team. This will include but not be limited to reviewing, approving, preparing and managing all studies and Contractors, Suppliers and Sub-Suppliers documentation related to the Service Holder field of expertise during FEED, Call For Tender and EPCI phases. The project consists of: * Production system: 2-off rings, 4-off (~25 km) Steel Lazy Wave Risers (SLWR), 6-off (71km) wet insulated rigid flowlines and 4-off rigid spools in CS and CRA lined pipe (WOL/MLP/HRB), as well as 19-off rigid jumpers in Duplex, * Gas Injection system: 2-off, 2-off SLWR (~12 km), 2-off (35 km) rigid flowlines and 2-off rigid spools in CS and CRA lined pipe (WOL/MLP/HRB), as well as 19-off TCP jumpers * Control system: 2-off dynamic and18-off static umbilicals, 2-off SDU, 38 XTs and associated FL. and associated subsea structures, equipment and ancillaries, for a very deep-water (>3000m) oil greenfield project. The Service Holder shall also assist the umbilical and flexible specialists in all matter related to the Service Holder field of expertise. The Service Holder will provide support to the SURF Technical Manager and the SURF team and liaise with other project teams (SPS and FPSO). ACTIVITIES 1. Adopt and demonstrate an exemplary behavior with regards to H3SE&Q, to implement and control H3SE rules and requirements within his area of responsibility. Ensure all flowlines technical documentation and SURF Contractor activities comply with H3SE&Q requirements and highlight any potential deviations. Ensure safe working practices are implemented along all phases of project 2. Adopt and demonstrate an exemplary behavior with regards to the Company Ethics and "Code of Conduct" policy, promote and enforce the Anti-Corruption Program within the Project, 3. Be responsible for all FEED SLWR engineering activities and manage all FEED contractor technical activities, 4. Be responsible for preparation and timely delivery of the SLWRs sub-system (4-off Prod SLWR and 2-off GI SLWR) Call For Tender technical package of the SURF EPCI Contract, considering the impact of other SURF/FPSO sub-systems (Lazy Wave Umbilicals, FPSO mooring lines, future riser development) 5. Be responsible for review, fitness for purpose and compliance to Project and Company requirements of SURF Tenderers Technical offers. Lead the technical clarifications with Tenderers and ensure timely closing of technical qualifications. Carry out Tenders technical evaluation and support for preparation of RTA technical part, 6. Define, develop, issue and maintain all necessary technical documentation related to the SLWR activities. Support and participate to the development and maintenance of Project Management main documents (SOR, FDP, PEP, PQP, Risks, etc.), 7. Ensure follow-up / review / validation of progress performed by Contractor and its Suppliers with regards to his/her disciplines and analyze/report drifts that could occur and propose remedial solutions 8. The Service Holder shall proactively provide alternative designs or technical solutions whenever required, accounting for the various constraints of project packages, such as reducing as much as possible the hook-up and in-place loads to minimize SLWR fatigue and the FPSO required pull-in winch capacity, mitigate potential clashes with other SURF items (umbilical and mooring lines), assist the Installation Lead to optimize the SLWR/Umbilicals wet parking configurations and sub-sequent transfer activities to FPSO, assist Umbilical and Flexible Engineers in Orcaflex studies, etc... 9. Supervise and control the detailed engineering by timely reviewing the disciplines-related documentation issued by Contractor (technical documentation / queries / derogation requests...), in order to ensure compliance with Project Specifications and Procedures (when applicable), international norms and standards with the objective to ensure respect of the schedule and to optimize costs without impacting required level of Quality and Safety 10. Raise consequently necessary comments and highlight unsafe design, deviations, unacceptable / unjustified design choices, constructability issues 11. Act, as technical referent vis-à-vis Contractor(s) for SLWR matters, and follow-up the Suppliers providing equipment for the SLWR, e.g.: flexible or titanium stress joint, buoyancy, VIV strakes... 12. Ensure technical compliance throughout the Project life of the engineered, procured, fabricated, tested and installed SLWR. Ensure all technical, QA/QC and H3SE project policies and requirements are duly implemented and ensure Contractors' compliance with contractual requirements in all areas. Anticipate and ensure adequate and timely reporting to the Technical Manager of any concern, issue or potential deviation. Propose timely and adequate solutions and optimizations. 13. Ensure that his/her work is in line with riser specialists of Company Headquarters, 14. Liaise with other package teams (SPS, FPSO) for interface matters with the support of Interface Managers and leads, 15. Organize and participate to Project Reviews, 16. Assist and support the Technical Manager and the Subsea Manager on all aspects of the SLWR activities related Call For Tender, Clarification & evaluation process, project execution and contracts management, and with the relations with Partners 17. Coordinate with other Team Members including the SURF contract engineer for the follow-up of correspondence and contract activities throughout the full CFT process and during Project Execution 18. Participate to the Installation Phase, tests, commissioning and handover, assisting when necessary the Installation Leader during all the offshore work campaigns. 19. Gather 'lessons learnt' and provide feedback to the company entities as required. Assist in the formalization of the close-out report CONTEXT AND ENVIRONMENT The activity takes place in the context of the FEED, Call For Tender, and Project Execution Phase of a major very Deep Water greenfield Project in Namibia. The Venus GPI is a multidisciplinary team that coordinates the development studies on the Deep-Water discoveries of offshore Namibia Block 2913B. The technical challenges the GPI / Project will face are the reservoirs development and management, the subsea production/injection system definition in a challenging environment. The Venus Project will be developed with the objectives to maximize economical results by optimizing the reserves, the schedule, reducing the costs and the Greenhouse Gas (GHG) emission, while maintaining the technical quality of the installations, with high H3SE requirements and focus.

The service holder is responsible for coordinating and supervising the activities that could be necessary during the Life of Project and FEED activities up to the close out. ACTIVITIES The Service holder shall: * Ensure robust and SAFE ONSHORE and OFFSHORE PIPELINE DESIGN in line with CONTRACT specifications, GENERAL SPECIFICATIONS and International STANDAR * Ensure high quality of all OFFSHORE AND URF pipeline Systems from FEED stage up to operation through, FEED, Detailed Engineering / Qualification / Manufacturing / Fabrication / Construction / installation / Pre-Commissioning activities performed by Contractor, whilst respecting local content requirement. * Identify and solve technical issues that may rise during all OFFSHORE AND URF PIPELINE activities of the Project. * Ensure the prompt and efficient dispatch, review and approval of all Detailed Engineering / Qualification / Manufacturing / Fabrication / Construction / installation / Pre-Commissioning documents issued by OFFSHORE AND URF Contractor, in due time, ensuring the adequate level of priority is given. * Ensure coherence of the OFFSHORE AND URF PIPELINE systems and manage interfaces with other Package Managers of the Project (Onshore, SPS Construction and Operation). * Ensure that OFFSHORE AND URF PIPELINE Engineering activities are performed in line with Contract requirement and Project Specifications, all within project schedule and budget. * Ensure that design and qualification outcomes/constraints are adequately considered in due time for Procurement, Manufacturing, Fabrication, installation, and Pre-commissioning, and vice/versa. * Ensure that HSE requirements are taken into consideration during design. * Participate in various technical reviews (Hazids, Hazops, Project Technical Reviews, Risk Assessments, etc.), and ensure implementation of recommendations as necessary. * Liaise with Project QHSES, QAQC, to ensure that the OFFSHORE AND URF scope is designed to be safe, operable, and maintainable. * Assist QA/QC manager for all quality issues related to OFFSHORE AND URF PIPELINE engineering. * Monitor Contractor performance against engineering aspects of the Contract and to assist the offshore Package Manager / PCM in management of associated Change Order Requests. * To initiate and attend all OFFSHORE AND URF PIPELINE engineering meetings, routine and subject specific, to pursuit Contractor's resolution and close-out of documents. * Assist with application process for required authorities' approvals. * Develop effective and constructive relationships with all Contractors representative(s) in a manner that enables a high level of value to be obtained. * Ensure that agreed project battery limits are adhered to. * Control and approve, when appropriate, the specifications, requisitions, design procedures, layouts, general arrangements, drawings, P&ID's, installation procedures, installation analyses reports, design reports, etc. * Responsible for the engineering of all equipment/facilities included in the work package. * Ensure that all relevant documentation created by the OFFSHORE AND URF Contractor, or its suppliers is reviewed and commented on by the relevant specialists within the appropriate time frame. * Maintain awareness of and ensure compliance with all relevant Statutory and Company HSE standards. * Actively identify best practice (industry, technical, professional, etc.) and encourage an environment in which this is willingly and openly shared. * Ensure construction, pre-commissioning, and start-up activities for OFFSHORE AND URF is delivered safely as per company requirement CONTEXT AND ENVIRONMENT The GPI team oversees Ntokon and Ima projects, main drivers being to ensure a cohesive approach across both projects, to mutualize best practices, create synergies towards CAPEX reduction objectives. Both projects are innovation driven with Conductor Supported Platform and Zapock pipeline concepts to be rolled-out and are developed with the objectives to maximize economical results by optimizing the reserves, the schedule, reducing the costs and the Greenhouse Gas (GHG) emission, while maintaining the technical quality of the installations, with high H3SE requirements and focus. Ntokon project * is a development in OML102 block in Nigeria based on minimalistic wellhead platform tied-back to Ofon OFP2 CPP via 26km pipelines (1 multiphasic production line, 1 water injection line). * FEED started in October 2024 for 5 months, FID is expected end Q2 2025 and first oil Q2 2027. Ima Project * is a development in OML112/117 block in Nigeria based on minimalistic wellhead platform tied-back to BNAG CPF via 23km pipelines (15km offshore, 8km onshore). * FEED starts in Q1 2025, FID is expected end Q4 2025 and first oil Q1 2028.

The service holder will be in charge of all the Material / Welding and NDE aspects of the SPS package ie covering activities from design, qualification, supply, manufacturing, and construction to pre-com. / commissioning for operation. It shall ensure overall consistency with good industry practices and respect for code / technical standards requirements. This will include but not be limited to and be reviewing, approving and dossiers Call For Tender and EPFS phases for the SPS system for a very deep water oil greenfield project. ACTIVITIES 1. Adopt and demonstrate an exemplary behavior with regard to H3SE&Q, to implement and control H3SE rules and requirements within his area of responsibility. Ensure all technical documentation and SPS Contractor activities comply with H3SE&Q requirements and highlight any potential deviations. Ensure safe working practices are implemented along all phases of project. 2. Adopt and demonstrate an exemplary behavior with regard to the Company Ethics and "Code of Conduct" policy, promote and enforce the Anti-Corruption Program within the Project 3. Be informed of SPS-related Company Rules and Specifications (CR's/GS's), international norms, and standards, extracting all the applicable requirements for the SPS package. 4. Identify, implement, and manage any study, or/and qualification program that would be requested for SPS engineering, construction, fabrication, testing, installation. 5. Ensure that all engineering, fabrication, construction, testing, qualification pre-commissioning, and commissioning aspects are suitably addressed during the different engineering phases by timely reviewing (or having reviewed) and validating the relevant SPS documentation issued by Contractor(s) (technical documentation/queries/derogation requests). 6. Coordinate the Materials, Welding & NDE studies related to design, risk analysis, QA/QC, etc. 7. Ensure a clear definition of the technical scope of work and interfaces between contracts, produce required CFT documentation, and review bidders' proposed execution plan and schedule. 8. Supervise and approve of Materials, Welding & NDE-related detailed design activities and support Engineering Manager in advising on and supporting qualification activities, linked to the use of new or non-standard/common technology (NDE, Welding & Materials matters, etc.) 9. Coordinate welding and NDT expertise and audit and vetting of equipment and service providers for the Welding & Materials procurement and construction 10. Welding competence requirements; knowledge of low alloy steel F22/8630 A77 etc, buttered connections, weld overlay, super duplex stainless steel butt welding of large bore 11. Define, develop, issue and maintain all necessary technical documentation related to the Venus SPS packages. Support and participate also to the development and maintenance of Project Management main documents (SOR, FDP, PEP, PQP, Risks, etc.) for SPS matters. 12. Ensure that HSE&Q issues are correctly handled in all SPS technical documentation. Raise subsequent comments and highlight deviations and unacceptable or unjustified design choices that could affect SPS equipment during fabrication, installation, and production. 13. Act, as technical referent for Contractor(s), coordinate all the activities of the SPS Engineering team by informing, supporting, and directing personnel in their roles, responsibilities, and objectives. 14. Participate in project reviews as requested by our referential (PR, DER, CSPP...). 15. Ensure safe working practices are used within the team during all phases of the project 16. Ensure confidentiality of all the SPS documentation produced (whatever its support) CONTEXT AND ENVIRONMENT The activity takes place in the context of the Call For Tender, and Project Execution Phase of a major very Deep Water greenfield Project in Namibia. The Venus GPI is a multidisciplinary team that coordinates the development studies managed by the company on the Deep Water discoveries of offshore Namibia Block 2913B. The technical challenges the GPI / Project will face are the reservoirs development and management, the subsea production/injection system definition in a challenging environment. The Venus Project will be developed with the objectives to maximize economical results by optimizing the reserves, the schedule, reducing the costs and the Greenhouse Gas (GHG) emission, while maintaining the technical quality of the installations, with high H3SE requirements and focus.

* Administrer et optimiser les bases de données OnPrem : PostgreSQL, Vertica, MariaDB, Oracle (11g, 19c - sortie progressive en cours). * Accompagner la migration et la gestion des bases sur AWS (RDS, Aurora MySQL, Redshift, Glue). * Concevoir et maintenir des pipelines ETL/ELT robustes et industrialisés. * Mettre en place les standards de gouvernance des données (qualité, sécurité, conformité). * Optimiser les performances (requêtes SQL, tuning, architectures de stockage). * Garantir la haute disponibilité, le PRA et la continuité de service. * Automatiser la gestion des environnements via IaC (Terraform, Ansible) et intégrer la donnée dans les chaînes CI/CD. * Contribuer au monitoring et à l'observabilité (Prometheus, Grafana, ELK). * Collaborer avec les équipes Data, BI et IT pour fournir des données fiables et performantes. * Effectuer une veille sur les évolutions technologiques (Cloud, Data Lake, Big Data). * Gérer l'évolution des schémas BDD via des outils de migration comme Liquibase.

Nous recherchons un Développeur Full Stack Senior H/F pour renforcer l'équipe de développement de notre Client. Votre rôle sera centré sur le développement front-end, tout en intervenant également sur le back-end en .NET et sur la gestion des bases de données SQL. Vous participerez à la conception, au développement et à la maintenance des applications, en collaboration avec les équipes métiers et techniques. * Concevoir et développer des applications web modernes (principalement en Angular) * Développer et maintenir des services/API en .NET (C#, Core) * Concevoir et interroger des bases de données relationnelles (SQL Server) * Contribuer aux choix technologiques et à l'architecture logicielle * Garantir la qualité du code (tests unitaires, revues de code, documentation) * Participer activement aux cérémonies Agile (daily, sprint planning, rétrospectives) * Assurer un support technique sur les modules existants * Respecter et promouvoir les standards de développement de l'entreprise * Mentoring des développeurs Junior, * CDI (seuls les ressortissants européens ou détenteurs d'un titre de séjour émis par la Préfecture des Alpes-Maritimes (06) sont éligibles à un emploi en Principauté) * Autres conditions contractuelles envisageables, nous contacter * Télétravail : non éligible pour cette mission

* Instruire les sujets d'architecture en s'assurant de la cohérence avec la stratégie d'entreprise et la politique produit. * Traduire la stratégie métier en stratégie technique et définir les solutions applicatives en termes d'architectures métier, fonctionnelles, applicatives, données et techniques... ... ... ... ... ... .... .. ... ... ... ... ... .... .. ... ... ... ... ... .... .. ... ... ... ... ... .... .. ... ... ... ... ... .., Pour le besoin de mon client, je suis à la recherche d'un Architecte Senior * Instruire les sujets d'architecture en s'assurant de la cohérence avec la stratégie d'entreprise et la politique produit. * Traduire la stratégie métier en stratégie technique et définir les solutions applicatives en termes d'architectures métier, fonctionnelles, applicatives, données et techniques

Un expert PowerBI qui sache discuter avec le métier pour mettre en place des KPIs. Mission: Il aura la charge de communiquer, proposer, challenger le responsable de la logistique pour établir un cockpit d'indicateurs., Expertise en Data et GCP. Almatek recherche pour l'un de ses clients, Un Data Analyst Power BI sur Lille., Expertise en Data et GCP. Environnement de travail Almatek recherche pour l'un de ses clients, Un Data Analyst Power BI sur Lille.